Products

Target manufactures and distributes a wide range of fixings and fastenings. Our base helical material is both flexible and strong enough to allow masonry to naturally move with its surroundings while shorter lengths provide the installation ease of a nail with the fixing capabilities of a screw.

Foundations

Heli Pile
Foundation System

The need for a quick and simple lightweight piling system was determined in the early 1990's. It was not until the middle of that decade that this desire, with the help of a "Smart Grant" from the DTI, bore fruit. The result was the "Millennium Product" award winning Heli Pile.

Heli Pile

Remedial Ties & Fixings

Bar Flex
Reinforcement Material

The tensile strength of the base material is more than doubled during the manufacturing process of Bar Flex and the deformation of the fins makes the bonding characteristics far superior to alternative standard reinforcing materials.

Bar Flex
Bow Flex
Lateral Restraint Tie

Bow Flex is a solution to bowing walls that is installed invisibly and externally and uses the existing structural members to provide the necessary stability.

Bow Flex
Cem Flex
Solid Masonry Connector

Originally developed in conjunction with British Rail, the Cem Flex method of pinning delaminated rings in masonry arches has now become widely accepted as a simple and economic solution. Its 8mm diameter is more than adequate for fixing delaminating masonry.

Cem Flex
Dri Flex
Remedial Wall Tie

The identified need to drill smaller holes in masonry to control the amount of spalling caused when drilling the near leaf resulted in Dri Flex - a remedial wall tie that provides a mechanical fix on both leafs.

Dri Flex
Resi Flex
Remedial Wall Tie

The Resi Flex system of wall tie replacement is available in 4.5mm and 6.0mm diameter. It offers the advantages of a non-expanding resin fix on both near and far leaf through a 10mm rotary-percussion drilled hole - eliminating spalling of the brickwork.

Resi Flex
Retro Flex
Remedial Wall Tie

The Retro Flex system of wall tie replacement is available in three different diameters of 6mm, 8mm and 10mm. It offers the advantages of a non-expanding mechanical fixing on the far leaf and a polyester resin or cementitious grout fixing on the near leaf.

Retro Flex

New Build Ties & Fixings

Skew Fast
Warm Roof Fixings

Skew Fast fixes the counterbattens over insulation meaning that the counterbattens effectively become the rafters. Tile or slate battens can be fixed back to the counterbattens in the standard, and accepted, manner.

Skew Fast
Fast Flex
Timber Batten Fixing

Fast Flex fixings offer the ease of use of a nail but the fixing capabilities of a screw and plug. Because of their design there is minimal finishing required once they are driven home. The Grade 304 stainless steel ensures that there is no unsightly staining or streaking of surface finishes, and they are not affected by any aggressive timber treatments.

Fast Flex
Turbo Flex
Thin Joint Wall Tie

During the construction of the outer leaf the Turbo Flex tie is laid over the top of the masonry and hammer-driven into the aac blocks. Where insulation panels are to be included within the wall cavity an insulation retaining clip is easily attached to the Turbo Flex and 'wound' along the tie to hold the insulation panels securely in position.

Turbo Flex

Grouts & Resins

Bond Flex
Cementitious Grout

Bond Flex XL cementitious grout is a non-shrink, pumpable, thixotropic, high performance, cement-based grout suitable for injection with a hand applicator.

Bond Flex
Polyester Resin
Resin

Target Fixings Polyester Resin is a high performance, fast curing two-part chemical anchoring system based on unsaturated Polyester Resin in styrene.

Polyester Resin